Vision & Mission
PEOs & POs
Research & Journals
Faculty & Staff
Annual Newsletter 2016, Volume-3, Electrical & Electronics Engg. Deptt
Certificate of Presentation (Knowledge Sharing)
Undertaking by the students having short attendance
Profarma for hardware requirements for projects
ADC Even Sem 2016-17
Undertaking for Question Paper Submission
Performa for Attendance Discrepancy Check
Guest Speaker Evaluation Form
Non Registration format
DECLARATION UNDERTAKING BY THE STUDENTS
Leave Format Student
ADC Even Sem 2016-17
Short Attendance Undertaking
Low Attendance Format
Committee Even semester 2016-17
Job Opportunities in Electrical and Electronics Engineering
Research Groups 2016-17
Syllabus for EN Second Year Odd Semester (2016-17)
Syllabus for EN Third Year Odd Semester (2016-17)
EN Departmental Committee 2016-17 Final
FORMAL GRIEVANCE REGISTRATION FORM
WORKSHOP EVALUATION FORM
Annual Newsletter 2015, Volume-2, Electrical & Electronics Engg. Deptt
EN Departmental Committee 2015-16
List of Current Projects with Tools and Overviews 2015-16
Project Details 2014-15
Project Details 2013-14
Project Details 2012-13
Current Project Details 2015-16
Project Overview and Tools 2014-15
Syllabus for EN Second Year 2015-16
Common Syllabus for Second Year (All Branches) 2015-16
Syllabus for EN Third Year 2015-16
Syllabus for EN Fourth Year 2015-16
Research Groups and Projects (2012-13, 2013-14 and 2014-15)
Information Brochure of EN Department
Electrical Engineering Lab
Ground Floor, EN Department
Electrical Engineering lab caters to the needs of first year students of all batches. This lab houses all the experiments such as different network theorems verification, speed control of different machines, load test on different machines & transformer, which illustrate the basic theory related to Electrical Engineering and gives in depth practical knowledge of the electrical machines & equipments. We have also some experimental set ups beyond the syllabus such as testing of transformer and V-Curve on synchronous motor.
Power System Lab
As per new university norms, there are experiments based on simulation. Simulation based experiments are MATLAB Software based. The Lab is equipped with computers having MATLAB software to perform simulation based experiments. Hardware based three are six experiments namely: IDMT Panel, Differential Relay (Percentage), Cable Fault Locator, Negative Sequence Reactance, Zero Sequence Reactance, Sub Transient Direct Reactance Sub Transient Quadrature Reactance.
Electrical Machine and Automatic Control Lab
Ground Floor, EN Department
This lab fulfills the requirements such as EMEC-I, EMEC-II and EMAC (ME) Labs in the University curiculum of IInd & IIIrd year students. This lab contains all the experiments on DC & AC machines and transformers, as per the University curiculum such as swinburne test for testing of transformer, V-curve of Synchronous motor, load test on the DC motor & generator, synchronization of alternators, no-load & blocked rotor test of 3-phase induction motor. The lab also contains a D.C. Source of 220V/68A for smooth conduct of the experiments in the lab. We also have some experiments which beyond to the syllabus like no-load and blocked rotor under variable frequency, negative & positive reactance calculation etc.
Power Electronics Lab
Power Electronics Lab is utilized by 1. B. Tech VI Semester EN students for Power Electronics Lab EEE-651. 2. M. Tech (Power Electronics & Drives) First Semester students for Power Converter - I lab 3. M. Tech (PE&D) II Semester students for Power Converter - II lab. 4. B.Tech VII and VIII Semester students for project work. 5. M. Tech IV Semester students for their project work. The lab is equipped with 12 hardware setups consisting of all types of power convertors, DSP 2407 trainer kit as a controller and digital storage oscilloscopes for measurement. Further the lab has MATLAB, 5 user Power Sim simulation software (PSIM).
Electrical Measurement Lab
RAHAT ULLAH KHAN
In Electrical Measurement lab, various parameters (e.g. Temperature, pressure, capacitance, Resistance etc.) are analyzed and measured with the help of different modules (AC&DC Bridges and Embedded systems). We have a simulation software - Lab VIEW by National Instrument in this lab for live simulation and control of parameters like Temperature, pressure, voltage & currents, which gives students the better understanding and help them to explore the area concerned. Another Embedded unit we have in this lab is PLC trainer Kit, which deals with the industrial applications and brings the better understanding to our students. A few experiments which can be performed on PLC are : PLC based Tank Level control, PLC based Lift control, Star Delta Control etc.
Electronics lab is catering to the needs of facilities in electronics field by training its students to make valuable contribution. This lab is used by B. tech students. It helps students to enhance their knowledge about various analog and digital electronics equipments both passive as well as active. In Electronics lab,study of various rectifiers, FET and transistoris done.In this Lab designing of various oscillator, summer, integrator circuits and multivibrator is done using operational amplifier IC. This Laboratory is fully equipped with the required instruments such as C.R.O., Multimeters, signal Generator etc. to conduct experiments with digital ICs for UG students. It helps students to enhance their knowledge about various electronics equipments like shift registers, counters, adders, subtractors and seven segment display devices etc .This lab is very essential for students to learn theoretical concept by designing circuits practically. The objective of this lab is to prepare its students with good foundation in electronics field so that they become graduate and effective system engineers.
Integrated Circuit Lab
BRAJESH KUMAR TIWARI
Integrated Circuit Lab has been set up with the objective of providing facilities to the students to concentrate more on the design issues. The laboratory manual sets the guidelines, complements the theory, develops a design procedure and sets the specifications for design and also for wide range of analog and digital circuits and systems so as to enable a designer/engineer to meet the requirements of design and analysis of practical circuits.
Control System Lab
MD. SHARIZ ANSARI
Control Engineering is of significant interest in most areas of industry. Control System applications are playing important role in the developing world, making it crucial for the students to be exposed to contemporary control system equipment in a realistic manner. In order to connect theoretical material taught in lecture courses with the realities of physical hardware and simulation. To achieve the goal, Control Systems laboratory has been set up on 2nd floor in Department of Electrical Engineering to provide this realistic environment. This laboratory provides to undergraduate as well as post graduate students with a test bed to learn and practice fundamental concepts of control systems. Students perform the experiments as per the list of experiment suggested by university.
Electric Drive Lab
Ashish D. Thombre
The drives lab caters to the needs of M.Tech students. The Lab has AC and DC drives based experiments. A few experiments are : five-phase induction motor drive, closed loop PMSG - DC motor set up, matrix converter, PMSM drive, BLDC drive etc. The Lab is equipped with TMS320F2812 DSP from Taxas Instruments for motor control appications. This lab is very essential part of electrical engineering as it contains facilities which are used by the B.Tech and M.Tech students in carrying out the various hardware projects.
Computer Aided Design Lab
NEERAJ KR. GUPTA
C-111 & 112
CAD Lab is catering to the needs of the advanced facilities in "what-if" analysis for Electrical and Electronics Engineer. This lab consists of software MATLAB and PSPICE. The versatile nature of MATLAB allows "what-if" analysis that can be used to strengthen students understanding of electrical & electronics. MATLAB is useful in analyzing data obtained from laboratory experiments. In addition, it has been found that the interactive nature of MATLAB and its immediate graphing facilities are especially useful in enhancing the understanding of concepts and principles of electrical and electronics engineering fundamentals. SPICE is one of the most successful circuit simulation programs. Its widespread usage attests to the applicability of the program to large variety of circuit simulation problems. SPICE utilizes modified nodal analysis approach. It can be used for non-linear dc, non-linear transient and linear ac analysis problems. It can also be used to perform noise analysis, temperature analysis, Monte-Carlo analysis. One of the advantages of SPICE is its inclusion of device models for active devices such as diode, BJT, JFET, and MOSFET.
In Network Lab we analyse different electrical circuits using theorems. The circuits which are analysed in the lab are also verified with the MATLAB software. This gives students a better understanding of the problem as they can see the response of the circuit theoretically using simulation tools as well as practically by performing on actual elctrical circuit. This lab is very essential part of Electrical Engineering in which students are made familiar with the electrical connections, how they are made and practically how circuit gives response. Some project works are also being carried out with the help of this lab using hardware packages.
Advanced Microprocessor and Application Lab
Microprocessor Lab is well equipped with experimental set ups to teach students the programmiong of both 8085 and 8086 microprocessors and 8051 & PIC microcontroller. Besides experiments on basic programming the Lab has interfacing modules such as Keyboard Controller 8251, serial communication of 8086 using RS 5232, traffic light controller, stepper motor control module. Lab also has Universal Programmer and other facilities to develop microprocessor / microcontroller based projects.